Standard Setaflex is a polymer modified, flexible, standard setting cement based wall and floor tile adhesive with increased adhesion and non-slip properties. Standard Setaflex has been specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone tiles to substrates subject to limited movement and/or vibration such as plywood overlay, timber framework underfloor heating. Formulated to give an extended bucket life of approximately 3 hours, Standard Set Setaflex is perfect where longer working times are required. Standard Set Setaflex is ideal for areas to prolonged or permanent wet conditions such as swimming pools.

Standard Set Setaflex can be used internally and externally and is unaffected by frost after setting

COVERAGE: 20kg will cover 5 – 6m² at 3mm thin bed application

PACK SIZES: 20kg

COLOURS: Grey, White

ADVANTAGES:

• Bucket life 3 – 4 hours – ideal where longer working times are required
• Developed for fixing to plywood & chipboard overlay
• Ideal for underfloor heating systems
• Specially formulated for fixing porcelain & natural stone tiles
• Improved slip resistance
• Ideal for swimming pools & wet rooms
• 3mm- 12mm bed depth

TILES:

• Ceramics
• Porcelain
• Marble
• Travertine
• Limestone
• Slate
• Terracotta
• Mosaics
• Quarry

SURFACE / SUBSTRATE:

• Sand/Cement Screed
• Concrete
• Plywood Overlay (12mm min)
• Chipboard Overlay (18mm min)
• Electric Underfloor Heating
• Water/Wet System Underfloor Heating
• Tile Backer Boards
• Gypsum Plaster
• Tile Backer Boards
• Tile on Tile
• Flooring Grade Asphalt & Bitumen
• Anhydrite Screeds
• Plaster
• Plasterboard
• Fibre Cement Sheets
• Cement/Sand Render
• Concrete Brick/Block
• Existing Vinyl Tiles